Celso R.

Debian Lenny / Testing num Toshiba Satellite A200 – 1GB

Posted in GNU/Linux by Celso R. on 27 de Outubro de 2007

http://pt.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=PT&PRODUCT_ID=131748&toshibaShop=false

Não consegui pôr a funcionar o leitor de cartões com cartões do tipo xD (os SD funcionam) e ainda não experimentei o bluetooth com nenhum dispositivo. O resto ou funcionou à primeira ou como mostro aqui:

Placa gráfica – Radeon HD 2600

#aptitude install libstdc++5

Sacar os drivers do site da ATI

sh ./ati-driver-installer-8.XXXXX-x86.x86_64.run –buildpkg Debian/testing

#dpkg -i fglrx-amdcccle_8.XXXXX_i386.deb
#dpkg -i fglrx-driver_8.XXXXX_i386.deb
#dpkg -ifglrx-driver-dev_8.XXXXX_i386.deb
#dpkg -i fglrx-kernel-src_8.XXXXX_i386.deb

(PS: Nalguns drivers mais recentes tenho que além disto instalar manualmente (sem criação de pacotes apenas #sh ./ati-driver-installer-8.XXXXX-x86.x86_64.run ) e depois ir à pasta /usr/modules/fglrx/build_mod/ e #sh make.sh  e ir a /usr/modules/fglrx/ e instalar #sh make_install.sh . Ver xorg.conf no fim.

Wireless

Intel® Wireless WiFi™ Link 4965AGN

$wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-4965-ucode-4.44.17.tgz
$tar xvf iwlwifi-4965-ucode-4.44.17.tgz
#cp iwlwifi-4965-ucode-4.44.17/iwlwifi-4965.ucode /lib/firmware/
#aptitude install linux-headers

$wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-1.1.0.tgz
$tar xvf iwlwifi-1.1.0.tgz
$cd iwlwifi-1.1.0
$make
#make install

[eu tive que fazer um link simbólico para as sources do kernel mas eu instalei o kernel 2.6.22 do unstable porque na altura o Lenny ainda vinha com o 2.6.21: # ln -s /usr/src/linux-source-2.6.22 /lib/modules/2.6.22-2-686/source]

% dmesg -c > /dev/null
% ./load debug=0x43fff
Verify that loading succeeds without any errors in the kernel:
% dmesg -c
Bring up the interface so it can be configured:
% ifconfig wlan0 up
Verify that you can scan and see access points:
% iwlist wlan0 scan
Associate to your network:
% iwconfig wlan0 essid XXXXXX
If you use WEP encryption, configure your key:
% iwconfig wlan0 key [1] …your key in hex…
% iwconfig <– Verify that you are associated
% dhcpcd wlan0

in: http://intellinuxwireless.org/

Webcam:
04f2:b008 Chicony Electronics Co., Ltd

#aptitude install linux-uvc-modules-2.6.22-2-686
#modprobe uvcvideo

ou

#aptitude install linux-uvc-source
#m-a update
#m-a prepare
#m-a build uvcvideo
#m-a install uvcvideo
#depmod -a
#modprobe uvcvideo

ou

$svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk
$cd trunk
$make
#make install
#depmod -a
#modprobe uvcvideo

Atenção: No Debian Testing a versão do Ekiga não funciona com a webcam a não ser que instalem o plugin v4l2 : http://ekiga.org/index.php?rub=5&path=debian/sid-i386 (libpt-1.10.10-plugins-v4l2 XXXX.deb) e o configurem nas opções.

Som

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller

O som funciona logo após instalar com excepção dos headphones.
Instalei a última versão do alsa.
No entanto sugiro que primeiro façam:
# sudo gedit /etc/modprobe.d/alsa-base

alterar e pôr:
options snd-hda-intel model=toshiba
Reboot e ver nas opções de som (alsamixer, gnome-volume-control, etc)

Se não funcionar:
$ wget ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.15.tar.bz2
$ tar -xvjf alsa-driver-1.0.15.tar.bz2
$ cd alsa-driver-1.0.15
$ ./configure
$ make
# sudo make install
# sudo gedit /etc/modprobe.d/alsa-base

alterar e pôr:
options snd-hda-intel model=toshiba

Wacom:

#aptitude install wacom-tools

Adicionar a /etc/X11/xorg.conf

Section “InputDevice”
Identifier “stylus”
Driver “wacom”
Option “Type” “stylus”
Option “Mode” “Absolute”
Option “USB” “on”
Option “Threshold” “10”
Option “Tilt” “on”
Option “Device” “/dev/input/wacom”
EndSection

Section “InputDevice”
Identifier “eraser”
Driver “wacom”
Option “Type” “eraser”
Option “Mode” “Absolute”
Option “USB” “on”
Option “Tilt” “on”
Option “Threshold” “10”
Option “Device” “/dev/input/wacom”
EndSection

Section “InputDevice”
Identifier “cursor”
Driver “wacom”
Option “Type” “cursor”
Option “Mode” “Relative”
Option “USB” “on”
Option “Threshold” “10”
Option “Device” “/dev/input/wacom”
EndSection

Section “InputDevice”
Identifier “pad”
Driver “wacom”
Option “Device” “/dev/input/wacom”
Option “Type” “pad”
Option “USB” “on”
EndSection

Tema de icons:
http://www.gnome-look.org/content/show.php/nuoveXT+2?content=56625

Fontes:
#aptitude install msttcorefonts
Free Image Hosting at www.ImageShack.us
Free Image Hosting at www.ImageShack.us

$ lsusb
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

$ lspci
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9581
01:00.1 Audio device: ATI Technologies Inc Unknown device aa08
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 01)
05:00.0 Network controller: Intel Corporation Unknown device 4229 (rev 61)
06:00.0 Memory controller: Intel Corporation Unknown device 444e (rev 01)
0c:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0c:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0c:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

/etc/X11/xorg.conf

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type “man xorg.conf” at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section “Files”
EndSection
Section “Module”
Load “i2c”
Load “bitmap”
Load “ddc”
Load “dri”
Load “extmod”
Load “freetype”
Load “glx”
Load “int10”
Load “vbe”
Load “dbe”
Load “v4l”
EndSection
Section “InputDevice”
Identifier “Generic Keyboard”
Driver “kbd”
Option “CoreKeyboard”
Option “XkbRules” “xorg”
Option “XkbModel” “pc105”
Option “XkbLayout” “pt”
EndSection

Section “InputDevice”
Identifier “Configured Mouse”
Driver “mouse”
Option “CorePointer”
Option “Device” “/dev/input/mice”
Option “Protocol” “ImPS/2”
EndSection

Section “InputDevice”
Identifier “stylus”
Driver “wacom”
Option “Type” “stylus”
Option “Mode” “Absolute”
Option “USB” “on”
Option “Threshold” “10”
Option “Tilt” “on”
Option “Device” “/dev/input/wacom”
EndSection

Section “InputDevice”
Identifier “eraser”
Driver “wacom”
Option “Type” “eraser”
Option “Mode” “Absolute”
Option “USB” “on”
Option “Tilt” “on”
Option “Threshold” “10”
Option “Device” “/dev/input/wacom”
EndSection

Section “InputDevice”
Identifier “cursor”
Driver “wacom”
Option “Type” “cursor”
Option “Mode” “Relative”
Option “USB” “on”
Option “Threshold” “10”
Option “Device” “/dev/input/wacom”
EndSection

Section “InputDevice” #não, não tenho wacom nenhuma foi só para testar uma vez :(
Identifier “pad”
Driver “wacom”
Option “Device” “/dev/input/wacom”
Option “Type” “pad”
Option “USB” “on”
EndSection

Section “InputDevice”
Identifier “Synaptics Touchpad”
Driver “synaptics”
Option “SendCoreEvents” “true”
Option “Device” “/dev/psaux”
Option “Protocol” “auto-dev”
Option “HorizScrollDelta” “0”
EndSection

Section “Device”
Identifier “ATI Technologies Inc ATI Default Card”
Driver “fglrx”
BusID “PCI:1:0:0”
Option “UseFBDev” “true”
Option “AllowGLXWithComposite” “true”
Option “XAANoOffscreenPixmaps” “true”
EndSection

Section “Monitor”
Identifier “Monitor Genérico”
Option “DPMS”
EndSection

Section “Screen”
Identifier “Default Screen”
Device “ATI Technologies Inc ATI Default Card”
Monitor “Monitor Genérico”
DefaultDepth 24
SubSection “Display”
Modes “1280×800” “1152×864” “1152×768” “1024×768”
EndSubSection
EndSection

Section “ServerLayout”
Identifier “Default Layout”
Screen “Default Screen”
InputDevice “Generic Keyboard”
InputDevice “Configured Mouse”
InputDevice “Synaptics Touchpad”
InputDevice “stylus” “SendCoreEvents”
InputDevice “eraser” “SendCoreEvents”
InputDevice “cursor” “SendCoreEvents”
InputDevice “pad” “”
EndSection

Section “Extensions”
Option “Composite” “Enable”
EndSection

Uma resposta

Subscribe to comments with RSS.

  1. kojiro said, on 12 de Abril de 2008 at 0:18

    so para deixar o meu apoio e obrigado! usei o guia para o som de um toshiba e =) just great ty!!


Os comentários estão fechados.

%d bloggers like this: